TM 10-3930-641-20
(Sheet 3 of 3)
HYDRAULIC FILTER SERVICE (CONT)
ACTION
REMARKS
LOCATION/ITEM
Remove and clean in nonflammable solvent.
6. Filter screen (5)
Clean in nonflammable solvent.
7. Cover (3)
Install.
8. Screen (5)
Replace.
9. Two filter elements (4)
Replace.
10. Cover and capscrews (3)
Start. Run at low idle. Inspect for leaks.
11. Engine
FILTER ASSEMBLY
Check.
12. Oil level indicator (6)
Add if necessary.
13. oil
Stop.
14. Engine
Close and lock.
15. Floor plate (1)
Oil level should be above ADD COLD mark.
End
2-489