TM 10-3930-641-34-1
VALVE COVERS SPECIFICATIONS
(Sheet 1 of 1)
TIGHTENING SEQUENCE FOR BASE
(1)
Torque for four studs (for locks of
18 + 5 lb. ft. (24 + 7 N.m)
fuel injection lines) ..............................10 + 3 lb. ft. (14 + 4 N-m)
(2)
Bore for adapter or plug. For installation, clean contact surfaces
of bore and adapter or plug with quick cure primer and put
retaining compound on the surfaces.
(3)
Tighten the bolts for the base in the
number sequence shown to ................. 18 5 lb. ft. (24 + 7 N.m)
(4)
Tighten the bolts for the cover in the
number sequence shown to ...............18 + 5 lb. ft. (24 + 7 N.m)
TIGHTENING SEQUENCE FOR COVER
18 + 5 lb. ft. (24 + 7 N-m)
TA098810
2-80