TM 10-3930-641-34-1
OIL PAN REMOVAL/INSTALLA'I'ION (CONT)
(Sheet 2 of 3)
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION I
1.
Oil pan gasket
Put in position.
NOTE
Apply clean grease to gasket surface to hold
gasket in place.
2.
Two 3/8-16 NC x 4 guide bolts (1)
Install at opposite ends in cylinder block.
NOTE
The guide bolts will insure correct alinement of
pan during installation.
3.
Oil pan (2)
Put in position and install half of the oil pan
capscrews.
4.
Guide bolts
Remove.
5.
Oil pan capscrews
Install remaining capscrews and tighten
securely.
6.
Oil level switch (3) leads
Connect.
TA099040
End
3-142
