TM 10-3930-641-34-1
OIL PUMP DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 4 of 5)
LOCATION/ITEM
ACTION
REMARKS
7. Bearings (9)
Using suitable driver remove from cover.
8. Shaft assemblies (6) and (7)
Remove from pump body (3)
9. Bearings (5)
Using suitable driver, remove from pump body.
10. Dowels (4)
Inspect for damage. Replace if necessary.
ASSEMBLY
1. Bearings (5)
a.
Using suitable driver, install in pump body.
NOTE
o
o
Install bearings s split bearings is 30 + 15 from
center line of pump outlet passage.
b.
Coat with clean engine oil.
2. Idler gear shaft (7), drive gear idler (6)
a.
Install in oil pump body (3).
b.
Coat with clean engine oil.
3. Bearings (9)
Using suitable driver, install in pump cover.
NOTE
o
o
Install bearing so split in bearings is 30 + 15
from center line of bearing bores toward oil
Go on to Sheet 5
pump outlet passage.
3-149