TM 10-3930-641-34-1
VALVE GUIDES REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 2)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1. Valve guides
Remove with suitable driver as shown at right.
2. Outside surface of replacement (new) valve
Coat with clean engine oil.
guides
INSTALLATION
a.
Install as shown with suitable driver and
1. New valve guides
bushing.
NOTE
The purpose of the bushing is to limit the
amount each guide is driven into the cylinder
head.
b.
Check inside diameter of guides to insure
proper valve-to-guide clearance.
TA099095
c. Ream if necessary.
End
3-263
