TM 10-3930-641-34-1
VALVE CLEARANCE SETTING (CONT)
(Sheet 3 of 4)
LOCATION/ITEM
ACTION
REMARKS
b. Adjust if necessary.
3. Intake valve clearance -cylinders No. 1, 2, 5,
7 (cont.)
c. Tighten valve nut to a torque or 19-25 lb ft
(26-34 N-m) and recheck adjustment.
4. Exhaust valve clearance -cylinders No. 1, 3,
a.
Measure between rocker arm and bridge.
4, 8
Should be 0.030 in. (0.76mm).
b. Adjust if necessary.
c. Tighten valve nut to 19-25 lb ft (26-34 N.m)
and recheck adjustment.
5.
Timing
bolt
(A)
a. Remove.
b. Use engine turning tool (9S9082) and rotate
flywheel 3600 (one full turn) counterclockwise
(when looking at flywheel).
c. Reinstall.
TA099099
NOTE
No. 6 piston is now at TC.
Go on to Sheet 4
3-270
