TM 10-3930-641-34-2
TRANSMISSION ASSEMBLY (CONT)
(Sheet 6 0f 31)
LOCATION/ITEM
ACTION
REMARKS
5.
Spring pins (28)
Install each until it is flush with outside
surface of carrier.
6.
Seal rings (36), (15) and (21)
Install.
7.
Ring gear (24)
Install on carrier.
8.
Bearing (32)
Install in No. 1 clutch housing (35).
NOTE
Be sure bearing is in contact with counter-
bore in clutch housing.
9.
Internal retaining ring (30)
Install.
10.
Seals (37) and (38)
Install in piston (39).
NOTE
Install seals so oil groove and sealing edge
will be toward inside of No. 1 clutch
housing (35).
TA099298
Go on to Sheet 7
4-93