TM 10-3930-641-34-2
TRANSMISSION HYDRAULIC CONTROLS REMOVAL/INSTALLATION (CONT)
(Sheet 7 of 7
LOCATION/ITEM
ACTION
REMARKS
5. Preformed packing (22)
a. Install on sleeves (23).
b. Lubricate with clean oil.
6. Sleeves (23)
Install through transmission case (10) and
into hydraulic controls.
7. Capscrew (31) and washer (32)
Install to hold sleeves.
8. Cover assembly (5)
a. Install with new gasket (8).
b. Secure with capscrews (7) and lock-
washers (2).
9. Preformed packing (19)
Install in manifold (15).
10. Manifold (15)
Install on transmission case (10).
TA099359
End
4-163
