TM 10-3930-641-34-2
BRAKE ACCUMULATOR REMOVAL/INSTALLATION (CONT)
(SHEET 2 of 4)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
WARNING
Make sure all pressure in brake system is re-
leased before any lines are disconnected from
brake accumulator.
1.
Two panels (1)
Remove from left side of machine.
2.
Floor plate above brake accumulator
Open and move away from accumulator.
3.
Charging valve cap nut (2)
a. Remove.
b. Turn valve 1/2 turn to relieve accumulator
pressure.
4.
Three capscrews (3) that secure
Remove.
accumulator bracket at top
5.
Hydraulic line (4)
a. Disconnect from accumulator.
b. Cap or plug opening.
6.
Tube assembly (5)a. Remove.
b. Cap or plug openings.
7.
Three eyebolts
Fasten to bracket at top of accumulator.
TA098913
Go on to Sheet 3
5-6