TM 10-3930-641-34-2
ACCUMULATOR DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 4 of 5)
LOCATION/ITEM
ACTION
REMARKS
11.
Head (14)
Remove.
12.
Preformed packing (15) and
Remove from head.
backup ring (16)
13.
Piston (11)
Remove using a slide hammer puller.
14.
Seal assemblies (12)
Remove from piston.
ASSEMBLY
NOTE
Be sure inside of accumulator and all parts
are clean.
1. Seal assemblies (12)
Install.
2. Piston (11)
Put in position in accumulator.
NOTE
Be sure threaded hole in piston is toward
HEAD end of accumulator.
3.
Piston (11)
Push into bottom of accumulator using a slide
hammer puller.
4.
Preformed packing (15) and
Install on head (14).
back-up ring (16)
Go on to Sheet 5
5-12
