TM 10-3930-641-34-2
ACCUMULATOR CHARGING VALUE REMOVAL/DISASSEMBLY/ASSEMBLY/INSTALLATION (CONT)
(Sheet 5 of 7)
LOCATION/ITEM
ACTION
REMARKS
NOTE
ASSEMBLY
Make sure all parts of accumulator charging
valve are clean. Lubricate all parts of valve
with clean hydraulic oil.
1.
Stem (1)
a. Install plug.
b. Tighten plug to a torque of 18-22 lb. ft.
(24-30 N-m).
2.
Stem (1) and stem (2)
Install in valve body.
3.
Valve (3),spring (4) and plug (5)
a. Install in valve body.
b. Tighten plug to a torque of 47-53 lb. ft.
(64-72 N-m).
4.
Spring (6) and spacer (7)
Install in valve body.
5.
Washer (10),balls (11),retainer (12)
Install in valve body.
and spring (13)
6.
Shims (8)
Install on retainer (9).
7.
Retainer (9)
Install in valve body.
TA098920
Go on to Sheet 6
5-18
