TM 10-3930-641-34-2
WHEEL AND BRAKE ASSEMBLIES ASSEMBLY (CONT)
(Sheet 6 0f 9)
LOCATION/ITEM
ACTION
REMARKS
13.
Each spring (22) and guide (20)
a. Install in housing (23).
stock 2" long x .75" dia. (50.8 mm x
19.1 mm), compress guide until pin (21)
can be installed.
14.
Preformed packing (24)
Install in housing (23).
15.
Housing (23)
Turn over.
16.
Six plugs (18)
Install.
17.
Duo-cone seals (13)
a. Thoroughly clean and dry all seals and seal
contact surfaces in housing (23) and wheel
assembly (34).
b. Coat seals with clean. SAE 30 oil.
c. Using suitable tooling install seal in
housing (23).
TA098939
Go on to Sheet 7
5-56