TM 10-3930-641-34-2
PARKING BRAKE CONTROL VALVE DISASSEMBLY/ASSEMBLY(CONT)
(Sheet 4 of 5)
LOCATION/ITEM
ACTION
REMARKS
11.
Snap ring (14) and seal (15)
Remove from cover.
12.
Preformed packing (16) in cover
Remove and discard.
13.
Plug (19), spring and plunger
Remove from cover.
14.
Preformed packing (18) on plug
Remove and discard.
ASSEMBLY
NOTE
Be sure all parts of parking brake valve are
clean. Lubricate all parts with clean hydraulic
oil.
1.
Preformed packing (16) inside of
Replace.
cover (17)
2.
Lip type seal (15)
Install in cover with tooling until seal contacts
counterbore. Lip is toward inside of cover.
3.
Snap ring (14)
Install over seal.
Go on to Sheet 5
5-66
