TM 10-3930-641-34-2
ARTICULATED HITCH DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 4 of 16 )
LOCATION/ITEM
ACTION
REMARKS
7.
Eight hydraulic lines (D) for brake
Tag, disconnect, and cap.
control valve
NOTE
Tag and disconnect lines at valves.
8.
Two capscrews (3), and washers (1)
Remove.
that hold upper pin (5)
WARNING
Do not remove cover until pin is loose.
9.
Four capscrews (2) and washers (1)
Loosen, but do not remove. Do not exceed
that hold cover assembly (4) in
1/4 inch.
position
10.
Steering neutralizer valve hydraulic
Tag, disconnect, and cap.
lines (E)
NOTE
If necessary, tag and remove any additional
lines that block access to hoses.
TA098967
Go on to Sheet 5
6-39