TM 10-3930-641-34-2
HYDRAULIC (STEERING AND BRAKE) PUMP DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 6 of 10)
LOCATION/ITEM
ACTION
REMARKS
32. Preformed packing (16)
Remove from housing.
33. Splined coupling (23)
Remove from housing.
NOTE
ASSEMBLY
Clean all parts.
If grooves in the bore are deeper than 0.015 in.
(0.381 mm), in either the steering or brake
pump, replace the body and gears.
1.
Splined coupling (23)
Install in housing.
NOTE
Replace snap ring (22) if necessary.
2.
Preformed packing (16)
Install.
3. Body assembly (27)
Place in position.
TA098977
Go on to Sheet 7
6-66