TM10-3930-641-34-2
TEE TEST PROCEDURE FOR STEERING SYSTEM (CONT)
(Sheet 24 of 24)
LOCATION/ITEM
ACTION
REMARKS
NOTE
Find the leakage rates for the right and left
cylinders. Use the test information from System
Test, Pump Test and Blocked Cylinder Tests.
Example: Find the leakage rate for the steering
cylinders.
Test 20: flow rate of pump and control valve.
Test 24: flow rate of pump, control valve and
left side cylinder.
Test 4: flow rate of pump, control valve and
both cylinders.
The system components tested in Tests 20 and
24 are the same except for the left side cylinder.
The difference in flow rates must be the leakage
in the left side cylinder (subtract the test infor-
mation for Test 24 from the test information
for Test 20).
The system components tested in Tests 24 and
4 are the same except for the right side cylinder.
The difference in flow rates must be the leakage
in the right side cylinder (subtract the test in-
formation for Test 4 from the test information
for Test 24). Make a comparison of the test
values with the values on Chart C.
End
6-120