TM 10-3930-641-34-2
TILT CYLINDER REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 3)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
WARNING
Do not remove both cylinders at one time
unless the mast is properly blocked and held
stationary.
1. Two hydraulic lines (3)
Disconnect, cap and identify.
2. Tilt cylinder (4)
Fasten hoist.
3. Two capscrews
Remove.
4. Retainer (6)
Remove.
5. Pin (5)
Remove.
6. Retainer (7)
Remove.
7. Two capscrews
Remove.
8. Pin (8)
Remove.
9. Tilt cylinder (4)
Remove.
TA099166
Go on to Sheet 3
7-51
