TM 10-3930-641-34-2
TEE TEST PROCEDURE FOR HYDRAULIC SYSTEM (CONT)
(Sheet 18 of 27)
LOCATION/ITEM
ACTION
REMARKS
4.
Flow rate (gpm)
Record.
NOTE
Make a comparison of the test data with the
data on Chart B. The information on Chart B
is the maximum for best performance.
NOTE
Tests 15 thru 22 are the same except for the
Test 15 - 600 rpm
engine rpms. Follow the procedure, changing
Test 16 - 800 rpm
the engine rpms for each test, according to the
Test 17 - 1000 rpm
list under REMARKS and Chart B. Record the
Test 18 - 1200 rpm
data for each test.
Test 19 - 1400 rpm
Test 20 - 1600 rpm
Test 21 - 1800 rpm
Test 22 - 2000 rpm
TESTS 15 THRU 22
PUMP TEST FOR AERATION
AND CAVITATION
1.
Manual load valve
Open fully.
2.
Engine
Start and run at 600 rpm.
Go on to Sheet 19
7-141
