TM 10-3930-641-34-2
CAB HEATER DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 7 of 9)
LOCATION/ITEM
ACTION
REMARKS
17.
Washers (48), grommet (47),
spacers
Remove from motor.
(46) and one bracket (45)
ASSEMBLY
1.
Bracket (45)
Install on screw posts of heater motor.
2.
'Two spacers (46)
Install on screw posts.
3.
Two washers (48) and
Install on screw posts.
grommets (47)
4.
Motor assembly
Position inside heater group (35) with
screw posts through holes.
5.
Two nuts (49)
Install on screw posts.
6.
Wires from motor
Push through hole in top of housing (35).
Go on to Sheet 8
8-25
