TM 10-3930-641-34-2
REAR BUMPER REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 6)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1.
Capscrews holding grab irons rear
Remove.
fender and steps
2.
Batteries
Disconnect cables and remove. See
TM 10-3930-641-20.
3.
Battery box
Remove retaining capscrews and remove
battery box.
4.
Nut (1) and plate
Remove three, each set of weights.
5.
Threaded rod (2), nut and plate
Remove three, each set of weights.
6.
Hoist
Fasten to pin (3) and lift counterweight from
vehicle.
NOTE
There are four (4) counterweights on the top
of the bumper. Each counterweight weighs
3600 pounds (1633 kg).
TA098789
Go on to Sheet 3
8-43