TM 10-3930-641-34-2
TOPHANDLER DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 10 of
13)
LOCATION/ITEM
ACTION
REMARKS
4.
Spring (26) and plunger (29)
Install.
5.
Nut (24) that secures plunger (29)
Install.
6.
Bayonet (33), washer (21) and
Install.
connecting lever (20)
7.
Slotted nut (18)
Install.
8.
Cotter pin (19) that secures slotted
Install.
nut (18)
9.
Guide bars (62)
Fasten to frame assembly with capscrews (61)
NOTE
Leave bearings (10), control arm (63) and lever
(66) loose until control rod (11) is fully
installed.
10.
Control rod (11)
a. Insert rod tip into inboard side of frame
assembly (3).
b. Install bearings (10), control arm (63) and
lever (66) on rod.
c.
Insert rod into other half of frame
assembly (3).
d. Install bearings (10) on rod.
e. Fully install rod.
Go on to Sheet 11
9-12