TM 10-3930-641-34-2
FORCE LIMITER DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 2 of 3)
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY
1.
Cover (3)
a. Remove four capscrews (5) and lock-
washers (4).
b. Remove cover.
2.
Clevis (11)
a. Remove nuts (14) and (13) rod holder
(12) and one spacer (9).
b. Remove clevis (11).
NOTE
Other spacer (9), washers (6) and springs (7)
will also be removed at the same time.
3.
Guide rods (2)
a. Drive pins (10) out of clevis (11).
b. Remove guide rods.
INSTALLATION
1.
Guide rods(2)
a. Install in clevis (11).
b. Align holes in rods and clevis.
c.
Secure with pins (10).
TA172236
Go on to Sheet 3
9-22
