TM 10-3930-675-10-1
ERROR CODES - CONTINUED
0020 00
Table 4. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Stop Vehicle
Stop Vehicle Immediately
Stop vehicle by switching to
Check wheel for
neutral.
Steering deviation between set
blockage.
Steering remains active and
point and actual value (tracking
If blocked, remove
tries to close up to set point.
error).
blockage and press
System will be active as soon
RESET.
as deviating wheel has closed
If not blocked, notify
up.
maintenance.
Wheel 1.
317
Wheel 2.
318
Wheel 3.
319
Wheel 4.
320
Stop Vehicle
Stop Vehicle Immediately
This error prohibits driving
after steering calibration if
Notify maintenance.
Wheel alignment values out of
range.
Wheel 1.
range.
321
Wheel 2.
322
Wheel 3.
323
Wheel 4.
324
Stop Vehicle
Stop Vehicle Immediately
Stop vehicle by switching to
neutral.
Notify maintenance.
Break in cable to proportional
Steering computer cannot
valve.
control wheel with broken
Wheel 1.
cable.
325
Wheel 2.
Faulty wheel has to be aligned
326
Wheel 3.
by manual operation of valve.
327
Wheel 4.
328
Stop Vehicle
Stop Vehicle Immediately
Stop vehicle by switching to
neutral.
Abort mission.
Cable to proportional valve -
Steering computer cannot
Notify maintenance.
short circuit.
control wheel with broken
Wheel 1.
cable.
329
Wheel 2.
Faulty wheel has to be aligned
330
Wheel 3.
by manual operation of valve.
331
Wheel 4.
332
Stop Vehicle
Warning - Degraded
Stop vehicle by switching to
Operation
neutral.
340
Press RESET.
Steering system will operate in
Finish mission.
Supply pressure below 1,450 psi
a degraded mode.
Notify maintenance.
(100 bar).
0020 00-17