TM 10-3930-675-10-2
ERROR CODES - CONTINUED
0020 00
Table 4. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Stop Vehicle
Stop Vehicle Immediately
Forklift operation is not
214
Press RESET.
possible.
Logical error - forklift sensors.
Abort mission.
Cable defective.
Notify maintenance.
Signal from 7206-1 or 7206-2.
Stop Vehicle
Warning - Degraded
Stop vehicle by switching to
Operation
220
Press RESET.
neutral.
Finish mission.
Steering system will operate
One pulse signal to the steering
Notify maintenance.
but is not redundant.
wheel interrupted.
The steering computer uses
Clock 1.
uninterrupted signal to steer
Clock 2.
the vehicle.
Cables defective.
Steering column sensor defective.
Finish Mission
Information/Maintenance
Possible ECU malfunction.
Other codes will also show.
221
Shut engine OFF/ON.
Communication fault - ECU 791,
If code clears, resume
connector 2.
mission.
Computer hardware fault.
If code remains,
notify maintenance.
Press RESET
Warning - Degraded
Left sideshift is not possible.
Operation
225
Finish mission.
Notify maintenance.
Left sideshift - open circuit.
Cable to valve defective.
Press RESET
Warning - Degraded
Uncontrolled left sideshift
Operation
226
Finish mission.
may occur.
Notify maintenance.
Left sideshift - short circuit.
Cable to valve defective.
Press RESET
Warning - Degraded
Right sideshift is not possible.
Operation
228
Finish mission.
Notify maintenance.
Right sideshift - open circuit.
Cable to valve defective.
Press RESET
Warning - Degraded
Uncontrolled right sideshift
Operation
229
Finish mission.
may occur.
Notify maintenance.
Right sideshift - short circuit.
Cable to valve defective.
Press RESET
Warning - Degraded
Spreading from 20 to 40 ft
Operation
231
Finish mission.
(6.10 to 12.19 m) is not
Notify maintenance.
possible.
20 to 40 valve - open circuit.
Cable to valve defective.
0020 00-11
