TM 10-3930-675-20-1
0006 00-30
TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED
0006 00
Table 10. Forklift Kit Troubleshooting Procedures (Non-Error Code).
END OF WORK PACKAGE
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Fork Functions Not Working.
1. Access maintenance ECS
display and check for active
hydraulic system error codes
(WP 0004 00).
2. Check forklift-to-tophandler
hydraulic hoses and quick
disconnects for damage and
signs of leakage.
a. Tighten loose connections.
b. Replace damaged or leaking
hoses (WP 0182 00).
3. Inspect forks and shaft sliding
surfaces for obstructions and
damage.
Remove any obstructions.
4. Inspect fork shift cylinders and
distribution valve for damage
and signs of leakage.
a. Replace damaged or leaking
distribution valve (WP 0182
00).
b. Notify DS Maintenance to
replace cylinder.
5. Test
tophandler
system
operating pressure (WP 0186
00, test point no. 11).
Operating pressure should be
3045 psi (210 bar).
Notify DS Maintenance to adjust
or replace tophandler and
steering
hydraulic
pump
assembly if pressure is not as
specified.
