Error Code 1221 - High Voltage Detected at Ambient Air Pressure Sensor Circuit - Cont

Error Code 1221 - High Voltage Detected at Ambient Air Pressure Sensor Circuit - Cont - TM-10-3930-675-20-1_375

Error Code 1221 - High Voltage Detected at Ambient Air Pressure Sensor Circuit - Cont - TM-10-3930-675-20-1_377

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
341

TM 10-3930-675-20-1 0021 00-4 ENGINE AMBIENT AIR PRESSURE SENSOR AND CIRCUITS TROUBLESHOOTING - CONTINUED 0021 00 Table 1. Error Code 1221 - High Voltage Detected at Ambient Air Pressure Sensor Circuit Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1221 - High Voltage Detected at Ambient Air Pressure Sensor Circuit - Continued 7. Place ignition switch to OFF position and disconnect sensor harness connector from ECU. 8. Inspect sensor harness and ECU connector for dirty, corroded, bent, broken, pushed back, and extended pins. Clean and repair connector(s) as required (WP 0111 00). 9. Check sensor harness and ECU for dirt or moisture in or on connector and for missing or damaged connector seals. Remove dirt and moisture from connector. Replace missing or damaged connector seals (WP 0111 00). 10.Place ignition switch in OFF position and disconnect sensor harness connector from ECU. 11.Measure resistance from pin 6 of sensor harness connector to all other pins in the connector. Resistance should be greater than 100k ohms. If engine harness requires replacement, notify SRA. >100K OHMS

Privacy Statement
Press Release
Contact