TM 10-3930-675-20-1
0026 00-6
TRANSMISSION TEMPERATURE TROUBLESHOOTING - CONTINUED
0026 00
Table 5. Error Code 783 - Sump Temperature Critical Threshold [212°F (100°C)]
Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 783 - Sump Temperature Critical
Threshold [212°F (100°C)] Failure - Continued
6. Enter
“DIAG
EXTRA
FUNCT” 4 (13) menu and
check water level sensor
setting. Enter “1” shut off and
“0” to run cooling fan. Check
if fording water level sensor is
clogged or damaged.
a. Clean and/or replace fording
water level sensor (WP 0090
00).
a. If problem continues, notify
SRA.
Table 6. Error Code 795 - Converter Output Temperature Critical Threshold [248°F (120°C) ]
Failure Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error
Code
795
-
Converter
Output
Temperature Critical Threshold [248°F (120°C)]
Failure
1. Allow
engine
and
transmission to cool.
2. Check coolant level (TM 10-
3930-675-10).
Add coolant as required (TM 10-
3930-675-10).
3. Check radiator top and side
grille for mud, snow or
obstructions.
Clear obstructions.
4. Check loose coolant hoses
and clamps.
Tighten or replace as required
(WP 0064 00 and WP 0113 00).
5. With
engine
idling,
transmission selector lever in
N (Neutral) position, parking
brake applied, and engine at
operating temperature, check
transmission fluid level (TM
10-3930-675-10).
Add
transmission
fluid
as
required (LO 10-3930-675-12).
6. Enter
“DIAG
EXTRA
FUNCT” 4 (13) menu and
check water level sensor
setting. Enter “1” shut off and
“0” to run cooling fan. Check
if fording water level sensor is
clogged or damaged.
a. Clean and/or replace fording
water level sensor (WP 0090
00).
a. If problem continues, notify
SRA.
