TM 10-3930-675-20-20158 00-6HEATER HOSES REPLACEMENT - CONTINUED0158 00ENGINE HEATER HOSES INSTALLATION6.Fill cooling system (WP 0063 00).7.Start engine (TM 10-3930-675-10) and check for leaks.8.Install transmission access covers (WP 0135 00).9.Return cab to operational position (TM 10-3930-675-10).10.Install engine cover (WP 0143 00).CAB HEATER HOSES REMOVALNOTEPerform the following steps to remove heater hoses between rear of cab and heater.1.Remove four screws (12), washers, and lower panel (13) from instrument panel (14).2.Remove three hose clamps (18), heater hose (20), connector (19), and hose (17) from heater/AC unit (25).3.Remove five hose clamps (16), heater hose (21), connector (22), hose (23), heat control valve (24), and hose (15) fromheater A/C unit (25).131214
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
