TM 10-3930-675-24-1
TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED
0007 00
Table 1. Engine Troubleshooting Procedures (Non-Error Code) - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Engine Will Not Crank - Continued.
5. Check voltage (24V) at starter a. If no voltage (24V) is found,
solenoid on starter at wire W11
check circuit breaker numbers
of S terminal while turning the
F50-1 and F50-2 for loose or
ignition switch to crank (WP
damaged connections.
0048 00-31).
b. If voltage is present (24V),
check starter and starter
solenoid for shorts or damage.
Replace shorted or damaged
starter and solenoid (WP 0072
00).
434-40171
6. Check starter relay 360 for Replace shorted, open, or
shorts, opens, or damage (WP damaged relay (WP 0074 00).
0113 00).
7. Check voltage (24V) at XK2 a. If voltage (24V) is not found,
pin 7 while turning the ignition
check voltage at X8 pin 3 (WP
switch to crank (WP 0048 00-
0048 00-31).
31).
b. If voltage (24V) is present at
X8 pin 3, unplug X8 and check
continuity at the loose part of
X8 between pin 2 and 3 with
the ignition switch turned to
crank (WP 0048 00-31).
0007 00-2
