TM 10-3930-675-24-1
ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED
0008 00
Table 10. Error Code 1325 -
Injector Circuit Failure Troubleshooting Procedures -
Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1325 - Injector Circuit Failure -
Continued.
<10 OHMS
8. Place ignition switch in OFF
position
and
disconnect
internal actuator harness from
and
disconnect
injector
solenoid wires from solenoid.
a. Measure resistance from pin a. If resistance is as specified,
A (or 1) of injector solenoid
notify SRA to replace internal
connector to injector wire
actuator harness.
pigtail nut. Resistance b. If resistance is not as specified,
should be less than 10 Ohms.
(WP 0113 00).
b. Measure resistance from pin a. If resistance is as specified,
B (or 2) of injector solenoid
notify SRA to replace internal
connector to injector wire
actuator harness.
pigtail nut. Resistance b. If resistance is not as specified,
should be less than 10 Ohms.
(WP 0113 00).
0008 00-51