TM 10-3930-675-24-1
STEERING ECU (792), TRANSMISSION ECU (793), AND ENGINE ECU (794)
TROUBLESHOOTING - CONTINUED
0015 00
Table 5. Error Code 1341 - Engine ECU (794) Loss of Data Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1341 - Engine ECU (794) Loss of Data 2. Turn ignition switch to ON If voltage is not as required,
Failure - Continued.
position and check battery charge or replace battery (WP
voltage by placing positive (+) 0108 00).
probe of multimeter on
positive (+) battery terminal
and touch negative (-) probe to
negative (-) battery terminal
while trying to start engine.
Voltage should be at least
(+)12V
during
normal
conditions and at least (+)6V
during cranking. Check each
battery in the same way.
3. Turn ignition switch to OFF Clean terminals and tighten loose
position and check battery battery terminal connections.
terminals
for
secure
connection.
4. Check circuit breakers 51-F4 a. Reset circuit breakers, if
and 51-F5.
tripped.
b. If circuit breakers will not
reset, notify SRA.
0015 00-6
