TM 10-3930-675-24-1
ENGINE POSITION SENSOR CIRCUITS TROUBLESHOOTING - CONTINUED
0019 00
Table 1. Error Code 1115 - Engine Position
Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1115 - Engine Position Sensor Circuit 9. Inspect engine harness and Clean and repair connector(s) as
Failure - Continued.
engine ECU connectors for required (WP 0113 00).
dirty, corroded, bent, broken,
and pushed back or extended
pins.
10.Check engine harness and
Remove dirt and moisture from
engine ECU for dirt or
connector. Replace missing or
moisture in or on connectors
damaged connector seals (WP
and for missing or damaged
0113 00).
connector seals.
11.Check for short circuit to If engine harness requires
ground:
replacement, notify Sustainment
Maintenance.
a. Measure resistance from
engine harness connector
pin 47 to engine block
ground. Resistance should
be greater than 100k Ohms.
b. Measure resistance from
engine harness connector
pin 50 to engine block
ground. Resistance should
be greater than 100k Ohms.
>100K Ohms
USE TEST LEAD KIT P/N 3822758
0019 00-3
