TM 10-3930-675-24-1
ENGINE OIL PRESSURE SENSOR TROUBLESHOOTING - CONTINUED
0020 00
Table 2. Error Code 1141 - Oil Pressure Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1141 - Oil Pressure Sensor Circuit 13.Place ignition switch in OFF
Failure - Continued.
position. Disconnect engine
harness from oil pressure/
temperature
sensor
and
disconnect sensor harness
from engine ECU.
14.Measure resistance from pin a. If resistance is not as specified,
44 (or pressure signal) of
repair or replace connectors
sensor harness connector to pin
(WP 0113 00).
C (or 3) of oil pressure/ b. If engine harness requires
temperature sensor connector
replacement, notify
on harness side. Resistance
Sustainment Maintenance.
should be less than 10 Ohms.
<10 Ohms
15.Disconnect sensor harness
connector from engine ECU.
Place ignition switch in ON
position.
0020 00-12
