TM 10-3930-675-24-1
INTERNAL TRANSMISSION CLUTCH SLIPPAGE FAILURE TROUBLESHOOTING - CONTINUED
0030 00
Table 6. Error Code 782 - Internal Transmission Failure at Clutch KR Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 782 - Internal Transmission Failure 1. Check transmission oil level.
a. Consult
the
Lubrication
at Clutch KR.
Instructions for the proper oil
type and filling procedure (WP
0050 00 or TM 10-3930-675-
10-1).
b. Fill transmission to proper oil
level.
2. Inspect
all
electrical a. Connect
disconnected
connections
on
the
electrical connectors.
transmission for loose or b. Notify
Sustainment
unplugged connectors.
Maintenance to replace engine
and transmission wiring
harness.
troubleshooting a. Correct any problems found
3. Perform
procedure for error codes 655,
during the error code
troubleshooting procedures.
656, 658, and 659.
b. Replace
transmission
assembly (WP 0224 00).
Table 7. Error Code 845 - Clutch Failure Detected During Calibration Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
Error Code 845 - Clutch Failure Detected During
Calibration.
ECU (793) will indicate which clutch is affected on the
display with this error code.
Perform transmission calibration If calibration procedure continues
to trip error code 845, replace the
several times to see if the
calibration process will complete transmission (WP 0224 00).
(WP 0225 00).
Table 8. Error Code 846 - Clutch Adjustment Data Lost Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
Error Code 846 - Clutch Adjustment Data Lost.
ECU (793) is not able to read the correct clutch adjust-
ment parameters due to a replacement of ECU (793) or
a problem during the last data saved.
Perform transmission calibration
(WP 0225 00).
END OF WORK PACKAGE
0030 00-4
