TM 10-3930-675-24-1
STEERING VALVE CIRCUIT TROUBLESHOOTING - CONTINUED
0033 00
Table 6. Error Code 330 - Right-Rear Wheel Valve Solenoid,
Short Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 330 - Right-Rear Wheel Valve 5. Disconnect the 6031 connector a. If resistance is not as specified,
Solenoid, Short Circuit Failure - Continued.
and check the resistance of the
replace open shorted, or
6031 solenoid. Resistance
grounded solenoid (WP 0171
should be 12 to13 Ohms.
00).
Check resistance of each pin to b. If resistance is as specified,
ground. There should not be
check continuity of wires
continuity to ground.
19611 and 19612 to ground
and between each other (WP
0048 00-22).
c. Notify Sustainment
Maintenance to replace
shorted, grounded, or
damaged X196 wiring
harness.
6. Inspect ECU (792) pins 9, 11, a. Replace damaged ECU (792)
12, and 13 for connection or
terminal board (WP 0080 00).
damage. Check continuity of b. Repair or replace shorted,
wires A1969, A19610, A1911,
grounded, damaged wires, or
and A1912 to ground and
connectors (WP 0113 00).
between each other (WP 0048
00-22).
Table 7. Error Code 331 - Left-Rear Wheel Valve Solenoid,
Short Circuit Failure Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 331 - Left-Rear Wheel Valve Solenoid, 1. Disconnect X196 and X197 a. If resistance is not as specified,
Short Circuit Failure.
located behind seat in the
continue with step 3.
middle panel. Check the b. If resistance is as specified,
resistance between pins 13 and
continue with troubleshooting
14 on the loose part of the
procedure.
X196 connector (WP 0048 00-
22). Resistance should be 12 to
14 Ohms.
2. Check resistance at X197 a. If resistance is not as specified,
between pins 1 and 2 (WP
continue with troubleshooting
procedure.
should be 12 to 14 Ohms.
b. If resistance is as specified,
inspect the mounted part of
X196 and X197 for damage or
pushed back pins. Continue
with step 6.
c. Repair or replace damaged
connector (WP 0113 00).
0033 00-10
