TM 10-3930-675-24-1
STEERING SENSOR TROUBLESHOOTING - CONTINUED
0035 00
Table 9. Error Code 309 - Right-Front Wheel Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 309 - Right-Front Wheel Sensor 6.
Check resistance of
wires BU, a. If
continuity is
not found at
Circuit Failure - Continued.
YE, and GN between X167
any
one
wire,
notify
pins 4, 5, and 6 and X171 pins
Sustainment Maintenance to
replace X171 to X167 harness.
b. Repair or replace damaged
connectors (WP 0113 00).
7. Inspect ECU (792) pins 37, 86, a. Replace damaged ECU (792)
and 90 for connection or
terminal board (WP 0080 00).
damage. Check continuity of b. Repair or replace damaged
wires A1711, A1712, and
wires or connectors (WP 0113
00).
8. Inspect ECU (792) pins 33, 91, a. Replace damaged ECU (792)
and 138 for connection or
terminal board (WP 0080 00).
damage. Check continuity of b. Repair or replace damaged
wires A1714, A1715, and
wires or connectors (WP 0113
00).
c. Replace right-front wheel
sensor (WP 0104 00).
Table 10. Error Code
310 -
Right-Rear Wheel
Sensor Circuit Failure Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
Error Code 310 - Right-Rear Wheel Sensor
Circuit Failure.
Error codes 302 and 306 may be activated with error
code 310.
1. Check right-rear wheel sensor Replace sensor if damaged (WP
and wire for damage.
0104 00).
2. Check signal. Enter DIAG
If signals 1 and 2 are around 70
STEERING 9(16) in the
and does not change, this
diagnostic menu. Observe if
indicates a break in the circuit or
signals 1 and 2 change when
in the wheel sensor. Continue
steering in both directions.
with step 3.
0035 00-11