TM 10-3930-675-24-2
ENGINE AIR INTAKE HOSES AND TUBES REPLACEMENT - CONTINUED
0058 00
CHARGE AIR COOLER-TO-ENGINE AIR INTAKE MANIFOLD HOSES AND TUBES REMOVAL - CONTINUED
3.
Loosen two hose clamps (34) and remove hose (35) from charge air cooler (21) and tube (37).
4.
Remove U-clamp (36) holding tube (37) to bracket (49).
5.
Loosen two hose clamps (38) and remove tube (37) and hose (39) from tube (40).
6.
Loosen two hose clamps (41) and remove hose (42) from tube (40) and tube (43).
7.
Remove U-clamp (44) holding tube (43) to bracket (45).
8.
Loosen two hose clamps (46) and remove tube (43) and hose (47) from air intake connector (48) of engine air intake
manifold.
38 39 38
37
40 41 42
41
36
21
34 35 34
43
44
45
46
47
46
48
49
TOP VIEW
CHARGE AIR COOLER-TO-ENGINE AIR INTAKE MANIFOLD HOSES AND TUBES INSTALLATION
1.
Install hose (47) and tube (43) on air intake connector (48) of engine air intake manifold and tighten two hose clamps
(46).
2.
Install tube (43) on bracket (45) with U-clamp (44).
3.
Install hose (42) on tube (43) and tube (40) and tighten two hose clamps (41).
4.
Install hose (39) and tube (37) on tube (40) and tighten two hose clamps (38).
5.
Install tube (37) on bracket (49) with U-clamp (36).
6.
Install hose (35) on tube (37) and charge air cooler (21) and tighten two hose clamps (34).
7.
Install radiator splash shield (WP 0143 00).
8.
Install radiator top grating (WP 0144 00).
9.
Install engine cover (WP 0148 00).
END OF WORK PACKAGE
0058 00-4
