TM 10-3930-675-24-2
THROTTLE POSITION SENSOR (ACCELERATOR PEDAL) REPLACEMENT - CONTINUED
0062 00
INSTALLATION
1.
Install throttle position sensor assembly (10) on steering column base (14) with two screws (13).
2.
Connect connector (11) of throttle position sensor wiring harness (9) to ECM wiring harness connector (12).
3.
Install cover (7) on right side of cab floor with four screws (8).
4.
Install right lower panel (6) in vehicle with three washers (5) and screws (4).
5.
Install left lower panel (3) in vehicle with three washers (20) and screws (1).
3
1,2
4,5
6
434-40006
ARMY AND RESET VEHICLES
6
4,5
434-40007
USMC VEHICLES
END OF WORK PACKAGE
0062 00-4
