TM 10-3930-675-24-2
COOLING SYSTEM EXPANSION TANK MAINTENANCE - CONTINUED
0066 00
CLEANING AND INSPECTION
1.
Wash expansion tank with soap and water. Rinse thoroughly.
2.
Inspect expansion tank for cracks that could cause leaks. Replace if tank is cracked or otherwise damaged.
3.
Inspect all other removed components for damage. Replace if damaged.
ASSEMBLY
1.
Install new gasket (22), plug (21), new O-ring (20), and nipple (19) on underside of expansion tank (9).
2.
Install rubber ring (14) and cover (13).
13
14
15
19,20
21,22
16,17,18
INSTALLATION
1.
Install expansion tank mounting bracket (15) with two screws (18), four washers (17), and two nuts (16).
2.
Install hose (6) on bottom side of expansion tank (9) and tighten clamp (10).
3.
Position expansion tank (9) and connect two hoses (12) to underside of tank. Tighten two hose clamps (11).
0066 00-4
