TM 10-3930-675-24-2
ECS DISPLAY SCREEN REPLACEMENT - CONTINUED
0081 00
REMOVAL - CONTINUED
2.
Raise front of top plastic housing (1) upward for access to display screen (5).
3.
Disconnect two-wire ground connector (7) from display screen (5).
4.
Disconnect multi-pin connector (6) from display screen (5).
NOTE
Display screen is a unit consisting of display screen, flat wire connector, and touch pad.
Note position of display screen for installation.
5.
Remove two screws (8) and display screen (5) from top plastic housing (1).
1
6
5
8
7
INSTALLATION
NOTE
Ensure four hexagonal studs are positioned against the display protective window before tightening
display securing screws.
1.
Install display screen (5) in top plastic housing (1) with two screws (8).
2.
Connect multi-pin connector (6) to display screen (5).
3.
Connect two-wire ground connector (7) to display screen (5).
4.
Lower front of top plastic housing (1).
5.
Install top plastic housing (1) on bottom plastic housing (2) with eight washers (4) and screws (3).
0081 00-2
