TM 10-3930-675-24-2
ELECTRONIC JOYSTICK ASSEMBLY WIRING HARNESS REPLACEMENT - CONTINUED
0083 00
REMOVAL - CONTINUED
NOTE
If emergency stop switch is to be replaced, perform steps 7 and 8. If not, proceed to step 9.
Mark or tag position of all wires on emergency stop switch.
7.
Loosen four screws (14) and disconnect wires (13) from connector (15).
8.
Insert four wires (13) into new connector (15) and tighten four screws (14).
13
14
15
434-40013
9.
Loosen three turnbuttons (18) and remove cover (17) from seat base (16).
16
17
18
0083 00-3
