TM 10-3930-675-24-2
STEERING SYSTEM WHEEL SENSOR REPLACEMENT - CONTINUED
0104 00
INSTALLATION - CONTINUED
6.
Install protective covering (11) on cable (15).
7.
Install sensor (5) assembly on bracket (1), in position noted during removal, with three screws (4), six washers (3), and
three new locknuts (2).
8.
Install sensor mounting flange (8) with two washers (7) and screws (6).
9.
Install bracket (1) on axle with two washers (10) and screws (9).
10.
Install clamp (14) with washer (13) and screw (12).
2,3,4
1
5
6,7
15
12,13,14
11
8
9,10
11.
Install new tiedown straps as needed.
12.
If removed, install engine cover (WP 0148 00).
13.
Perform steering calibration (WP 0238 00).
END OF WORK PACKAGE
0104 00-7/(0104 00-8 Blank)
