TM 10-3930-675-24-2
TRANSMISSION OIL FILTER AND OIL COOLER HOSES AND FITTINGS REPLACEMENT -
CONTINUED
0115 00
TRANSMISSION-TO-OIL FILTER HOSES REMOVAL - CONTINUED
1.
Trace and tag three hoses (14, 16, and 17) from transmission oil filter head (22) to transmission (1).
2.
Cut tiedown straps as needed to release hoses (14, 16, and 17).
3.
Remove screw (19), nut (20), washer (21), and two clamps (18) from hoses (14 and 16).
WARNING
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may
result in injury to personnel.
4.
Position suitable container to catch lubricating oil contained in hoses (14, 16, and 17).
NOTE
Note hose routing when removing hoses to aid in installation of hoses.
5.
Disconnect hoses (14, 16, and 17) from transmission oil filter head (22).
6.
Disconnect opposite ends of hoses (14, 16, and 17) from three adapter fittings (15). Remove hoses.
7.
If damaged, remove adapter fittings (15) from transmission (1).
15
15
16
15
17
14
18
1
22
18
19,20,21
0115 00-4
