TM 10-3930-675-24-2
STEERING COLUMN REPLACEMENT - CONTINUED
0133 00
INSTALLATION
1.
Install steering column (2) on steering column base (33) with eight washers (32), four screws (31), and new locknuts
(30).
2.
Install tube (26), bolt (27), washer (28), and lever (29) on steering column base (33).
3.
Position bottom plastic housing (5) and top plastic housing (16) on steering column (2).
4.
Route each of 13 connectors to steering column (2), through rubber bellows (7), and up through bottom plastic housing
(5) to front of top plastic housing (16).
NOTE
Perform steps 5 thru 10 at front of top plastic housing.
Apply electrically conductive grease to connectors before connections are made.
5.
Connect five connectors (25) of steering column wiring harness (17) to five indicator lights (24).
6.
Connect ground wire (21) to transmission indicator light panel (20) with lockwasher (23) and nut (22).
20
21
22,23
0133 00-5
