TM 10-3930-675-24-2
WINDSHIELD WIPER MAINTENANCE - CONTINUED
0158 00
FRONT WINDSHIELD WIPER AND MOTOR INSTALLATION
NOTE
To install wiper blade only, perform step 9.
1.
Install windshield wiper motor (21) on cover (13) with windshield wiper motor shafts (14) through cover. Install two
new seals (15), nuts (16), and plastic caps (17).
2.
Connect ground wire (23) to motor (21) with screw (26).
3.
Connect wiring harness connector (24) to motor connector (25).
4.
Install grommet (10) and nipple (11) in cover (13). Connect hose (22) to nipple.
23
22
25
21
24
18
26
13
NOTE
Ensure all old gasket forming compound has been removed and mounting surfaces are clean.
5.
Apply gasket forming compound to panel (18). Install cover (13) with windshield wiper motor on panel with four wash-
ers and capnuts (12).
NOTE
Perform step 6 to install steering arm and wiper arm.
6.
Lift cover and install steering arm (7) and wiper arm (6) on windshield wiper motor shafts (14) with new lockwasher
(20) and nut (19). Close cover.
0158 00-4
