TM 10-3930-675-24-2
BOOM-TO-BOOM EXTENSION FLEXIBLE CONVEYER MAINTENANCE - CONTINUED
0163 00
NOTE
Tag all hydraulic lines.
Remove and discard tiedown straps as necessary to gain free movement in hydraulic hoses and
wiring harnesses.
REMOVAL
1.
At right rear of boom (4), remove two screws (2) and disconnect boom wiring harness (3) connector (5) from connector
(1).
2.
Disconnect cable (6) connector (7) from connector (8).
3.
Remove boom wiring harness (3) and cable (6) from attachment to right side of boom (4).
2
1
3
4
8
5
7
6
4.
At right front of boom (4), remove locknut (10), two washers (11), screw (12), and clamp (13) from conveyer support
bracket (9). Discard locknut.
5.
Remove clamp (13) from boom wiring harness (3) and cable (6).
0163 00-2