TM 10-3930-675-24-2
HEATER HOSES REPLACEMENT - CONTINUED
0190 00
ENGINE HEATER HOSES INSTALLATION - CONTINUED
6.
Fill cooling system (WP 0064 00).
7.
Start engine (TM 10-3930-675-10) and check for leaks.
8.
Install transmission access covers (WP 0142 00).
9.
Return cab to operational position (TM 10-3930-675-10).
10.
Install engine cover (WP 0148 00).
CAB HEATER HOSES REMOVAL
NOTE
Perform the following steps to remove heater hoses between rear of cab and heater.
1.
Remove three screws (12), washers (13), and left lower panel (14).
2.
Remove three screws (15), washers (16), and right lower panel (17).
14
12,13
17
15,16
434-40006A
ARMY AND RESET VEHICLES
14
12,13
17
15,16
434-40007A
USMC VEHICLES
0190 00-6
