TM 10-3930-675-24-2
WINDSHIELD AND WINDOW GLASS REPLACEMENT - CONTINUED
0241 00
REMOVAL - CONTINUED
7.
Cut through gasket forming compound of cab roof window (8) and remove cab roof window from cab (7).
8
7
INSTALLATION
NOTE
Perform steps 1 and 2 to install cab roof window.
1.
Apply gasket forming compound to all four edges of cab roof window (8) and top of cab (7).
2.
Position cab roof window (8) on cab (7). Reapply gasket forming compound as needed and smooth to a beveled finish.
3.
Position length of weatherseal (5) on edge of window (4) and cut weatherseal so ends of weatherseal will meet in a
straight line. Remove weatherseal.
4.
Install weatherseal (5) on window (4) with recess for locking strip (6) facing toward outside of window.
5.
Install locking strip (6) on weatherseal (5).
6.
Lubricate weatherseal (5) with a solution of detergent and water.
7.
Place window (4) with weatherseal (5) to outside of cab (7), with one lower corner of weatherseal installed on flange of
cab.
8.
Work around entire length of weatherseal (5) while gently pressing inward on window until weatherseal is fully installed
on cab (7).
9.
Install four brackets (3) with four washers (2) and capnuts (1).
10.
Install windshield wiper, as applicable (WP 0158 00).
END OF WORK PACKAGE
0241 00-3/(0241 00-4 Blank)
