TM 10-3930-675-24-2
GENERAL MAINTENANCE INSTRUCTIONS - CONTINUED
0284 00
HYDRAULIC HOSE CONNECTION PROCEDURES - CONTINUED
3.
Connect hydraulic hose and use a Crowfoot Attachment Set (Item 24, WP 0289 00) and appropriate torque wrench to
tighten the connection.
4.
Table 5 provides torque range in relation to size of hydraulic hose fitting.
Table 5. Hydraulic Hose Torque Chart.
WIDTH ACROSS FLATS IN MM
TORQUE RANGE
18
17-18 lb-ft (23-25 Nm)
21
24-28 lb-ft (33-38 Nm)
24
38-42 lb-ft (51-57 Nm)
29
59-66 lb-ft (80-90 Nm)
35
88-96 lb-ft (120-130 Nm)
41
111-125 lb-ft (150-170 Nm)
48
133-147 lb-ft (180-200 Nm)
51
147-177 lb-ft (200-240 Nm)
CAUTION
Following any hydraulic system maintenance that results in hydraulic system being opened, replace-
ment of hydraulic reservoir return filters is required after 100 hours of operation.
5.
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0185 00).
FLUID DISPOSAL
Dispose of contaminated drained fluids in accordance with the Standard Operating Procedures (SOP) of your unit.
END OF WORK PACKAGE
0284 00-7/(0284 00-8 Blank)
