TM 5-3810-306-34
ROD PRESSURE CHANNEL
ZERO POINT ADJUSTMENT
8. DISCONNECT HYDRAULIC HOSE FROM THE ROD SIDE PRESSURE TRANSDUCER.
9. LEAVE BLACK (-) LEAD CONNECTED TO Mp15 MOVE RED (+) LEAD TO Mp 5.
10. ADJUST P5 TO OBTAIN A READING OF .500 VOLTS (500mv) ON METER.
11. RECONNECT HYDRAULIC HOSES TO PRESSURE TRANSDUCERS, THEN BLEED AIR FROM
HYDRAULIC LINES.
12. PUT THE OUTSIDE COVER BACK INTO PLACE, SECURE WITH THE (8) SCREWS TAKEN OUT
DURING THE DISASSEMBLY PROCEDURE, REPLACE WIRE SEAL.
3-84
